The D-Link D link router configuration step by step pdf-2310 wireless router can be used to create a secure home network for all of your wired and wireless devices. This will allow you to share your internet connection with any connected device.
Before you can start using the D-Link WBR-2310 router, you’ll need to configure the internet and wireless settings. Turn off or unplug your modem. Before connecting the modem to the router, turn the power off on the modem. If you can’t turn the power off, unplug the power cable from the back of the modem.
Obtain two Ethernet cables for the setup process. You’ll need one cable to connect the modem to the router, and another to connect the router to your computer during setup. Your router or modem may have come with an Ethernet cable. Connect the modem to the WAN port on the router. This is the Ethernet port closes to the power connector on the back of the router. It has a different color than the four LAN ports.
Leave the router’s power supply unplugged for the moment. Connect one of the LAN ports to your computer’s Ethernet port. You can usually find your computer’s Ethernet port along the back. Some laptops may not have an Ethernet port, but nearly every desktop computer should have one. Turn the modem’s power back on or plug it back in. Wait about 30-60 seconds for the modem to boot up. Connect the router’s power supply on the back and plug it into the wall.
It will take about 30 seconds to boot up. If your computer isn’t turned on, turn it on now. Make sure that you aren’t connected to any other networks, such as another wireless network. Check the indicator lights on the router.